How to Tune a Toshiba Regza

Toshiba's Regza is really a line of flat-panel, high-definition televisions that come equipped along with anti-glare coating, anti-blur technology, dynamic backlight control and 12-bit movie processing. To prepare the television for viewing, you must first run these devices through a "tuning" process; otherwise, the navigation buttons on the remote will struggle to access the channels provided by your antenna or cable television connection. Once you have completed this initial tuning procedure, the channel information will remain in the television's storage for future use.

Instructions:

1. Familiarize yourself with the buttons about the television's remote control. In particular, you will need to make use of the "OK" and navigation buttons, located in the center from the remote, as well as the "MENU" button, located 3 rows below the navigation buttons.

2. Press the "MENU" button to create up the main menu on your television's screen. Press the best navigation button repeatedly to select the option labeled "SETUP. " Make use of the down navigation button to highlight the setting labeled "ANT/CABLE within, " then press "OK" to confirm your selection.

3. Make use of the left and right navigation buttons to cycle through the available alternatives. Select "ANTENNA" if your television is connected to a good antenna, or "CABLE" if you are using a cable television connection. Press the "OK" button to confirm your choice, returning you to the "SETUP" menu.

4. Use the down navigation button to highlight the setting labeled "Auto Tuning" and press "OK" to verify your selection. Press the "OK" button a second time for you to begin the automatic tuning process. The television will now cycle through all the available channels, storing any active channels in its storage.

5. Use the down navigation button to highlight the "TV Settings" option in the "SETUP" menu. Press "OK to confirm your selection. Choose the option labeled "Channel Options" and press "OK. "

6. Review the listing of saved channels. You can configure the television to skip over certain channels by selecting the required channel from the listing and pressing the "OK" switch; this will place a check next to the funnel, confirming that it will be skipped when using the "CH" buttons to cycle through all of the available channels during viewing.